SERIES 1150 - SOLID IMPACT DOORS
|
Series 1150 is available in sizes up to and including 2438mm
wide x 2438mm high.
Double-Dutch models available for openings higher than
2438mm.
Suited for pedestrian, push cart, and light motorized pallet
traffic.
Available in a wide range of colours.
NOT RECOMMENDED FOR USE WITH MAN-RIDDEN OR HIGH SPEED
MOTORIZED TRAFFIC.
APPROVED FOR USE IN REGISTERED ESTABLISHMENTS.
Tough PVC extrusion internal framework, reinforced at the
corners for exceptional strength and durability.
Able to withstand temperature differentials of over 28
degrees Celsius without bowing or warping.
Can be fabricated with a different colour face panel on each
side.
The rugged v-cam hardware is virtually maintenance free.
Easily replaceable gasket mounted in a PVC track.
Large thermo window for visibility and safety.
Doors under 2134mm wide subjected to motorized man-ridden
traffic are not warranted against panel breakage.
For custom sizes please contact us.
A 100mm wide x 6mm thick steel frame mounted to a solid
foundation is recommended.
|
The door body shall be 44mm thick overall, double acting, shock
absorbing construction. The face panels shall be one piece 3mm
thick (6mm thick panels available: Please specify), high impact
and abrasion resistant. The face panels shall be bonded to the
PVC extrusion framework using an adhesive that will withstand
temperatures from –2 to 48 degrees Celsius and will not
delaminate under impact and/or stress. There will be no rivets,
bolts, or exterior trim. The interior door panels shall consist
of internal support beams and urethane foam for strength and
insulation. Door panels shall have full perimeter gasketing
including top and bottom hinge covers. Gasketing shall be
mounted in a extruded PVC track. Each panel shall have a clear
safety acrylic 3mm thick double “thermos” window. Standard
window size for door panel(s) under 762mm wide is 305mm wide x
559mm high. Window size for door panel(s) 762mm wide and over
will be 508mm wide x 559mm high.
|
The hinge hardware shall be jamb mounted, v-cam gravity type,
double acting, swinging 90 degrees in each direction. V-cam
gravity hinge hardware shall be an assembly of a cast aluminum
alloy upper door clamp, fitted with a cast aluminum alloy v-cam
follower complete with a 32mm diameter aircraft quality needle
bearing cam yoke roller. The lower bearing shall consist of cast
aluminum door clamp, fitted with a cast aluminum alloy bearing
and an adjustable spring compensator. Top v-cam and bottom
bearing are fitted with a long lasting nylon bushing for smooth
operation. All non aluminum metallic parts are galvanized to
resist corrosion.
|
Beige, Black, Blue, Brown, Green, Grey, Red, White
For other colours please contact us.
|
Double Dutch: used on openings higher than 2438mm.
Wear panels (up to 1219mm)
6mm thick steel floor mounted jamb guards.
Spring bumpers (up to 1219mm)
Jamb mounted jamb guards.
Wide angle hinges (90-135 degrees)
Chain locking collar.
6mm thick x 305mm extension “U” brackets.
Hold open device.
Custom window sizes.
Door stop.
Cane bolts (top and/or bottom)
Protective bollards.
6mm thick face panels.
|
Manufacturing specifications may change without prior
notice.
|
|
